Description
Modular Screw Air to Water Chiller – LSB Series
LSB series is the latest generation GREE air to water screw chiller units, ideal for large scale commercial and industrial applications. LSB series chillers are equipped with the latest technology screw compressors, utilizing eco-friendly R134a in order to provide increased capacity and high energy efficiency. With model capacity of 230, 350 and 430 kW and their modular installation capability of up to 8 single modules of in various combinations, up to 3.440 kW in total can be achieved for a single system.
High efficiency Full Load Operation – Eurovent certified
Utilizing new screw compressor technology, the chillers exceed the performance requirements of ASHRAE 90.1. All system components are selected for optimum performance, including condenser coil areas and evaporator sizes. By using a compressor on each chiller, unloading characteristics and part load performance values (IPLV indicator as outlined in Standard ARI 550/590-1998) are outstanding.
Compact Design – Quiet Operation
Through careful design and selection of every part, from the screw compressor and the fan motors to piping and components’ support elements, LSB series chillers succeed in having compact, with small footprint units and quiet operation.
Superior Controls
GREE has utilized the latest technologies concerning control, in order to provide enhanced user-friendly operation of the unit. Control logic is designed to provide maximum efficiency, to help provide continued operation in unusual operating conditions through proactive controls, and to maintain a history of conditions to aid in problem resolution. The unit can be integrated with your building automation system (BAS) through the built-in Modbus communication protocol.
Evaporator
The evaporator is direct expansion, shell-and-tube type with water flowing in the baffled shell side and refrigerant flowing through the tubes. The evaporator has a carbon steel fin and seamless high efficiency copper tubes roller expanded into a carbon steel tube sheet.
Refrigerant heads are carbon steel with multi-pass baffles to provide oil return and are removable to permit access to the tubes from either end. For water removal, 10mm vent and drain plugs are provided on the top and bottom of the shell. An ambient air thermostat controls the heater cable. The fitted and glued in place insulation has a K factor of 0.28. The refrigerant side maximum operating pressure is 2068 kPa. The water side operating pressure is 1048 kPa. Each evaporator is designed, constructed, inspected, and stamped according to the requirements of the ASME Boiler and Pressure Vessel Code.
Condenser
Condenser coils have internally enhanced seamless copper tubes arranged in a staggered row pattern. The coils are mechanically expanded into louver aluminum fins with full fin collars. Golden Fin is available for corrosive atmospheres, fitted with a protective wire mesh guard. Condenser fans are composed of corrosion resistant aluminum hub and glass-fiber reinforced polypropylene composite blades molded into a low noise airfoil section. They are designed for maximum efficiency and are statically and dynamically balanced for vibration-free operation. They are directly driven by independent motors, and positioned for vertical air discharge. The fan guards are constructed of heavy-gauge, rust-resistant, coated steel. The fan motors are totally enclosed air-over, squirrel-cage type, current protected. They feature ball bearings that are double-sealed and permanently lubricated.
Microprocessor Controller
The chiller’s Unit Control Module is an innovative, modular microprocessor control design. It coordinates the actions of the chiller in an efficient manner and provides stand-alone operation of the unit. A Human Interface Panel is a standard component of the Chiller. Access to all unit controls is via the Human Interface Panel.
Compressor
Suction gas cooled semi-hermetic compact twin screw compressors with high efficiency profile. Compressors are provided with high efficiency suction strainer, oil trainer crank case heater and built in safety pressure relief valve. Moreover, they come with intelligent electronics including motor temperature monitoring, phase sequence monitoring, manual reset lockout and discharge temperature protection by PTC`s sensors. Optimized oil management ensures minimum refrigerant dilution in oil.